With the Mira 32, PVC, PE or PP cables can also be processed with a single universal V-blade. The stripping enables both full and partial stripping and a minimum insertion depth of 14 mm – even up to 11 mm with upgraded, thin grippers. This also processes cables for miniaturized connector housings and a small distance between the jacket and crimp. Operation is extremely simple: The incision diameter, stripping length and pull-off length can be adjusted with just three rotary knobs. When the wire tip touches the trigger, wire processing is started automatically. The Mira 32 is portable with an integrated ergonomic carrying handle. One electrical connection is sufficient for universal commissioning.

The Mira 230 and Mira 230 Q wire strippers allow you to process a wide range of wire specifications. They are particularly suitable for processing multi-core wires due to their directly consecutive work steps for stripping and cutting without changing the program. Each wire and sequence can be stored in the library and reproduced at any time. The electronic automatic conductor detector ACD checks for possible contact between the blade and conductor and thus prevents undetected faulty wires. ACD technology is also used as an automatic adjustment aid in which the incision diameters are adapted to the conductor diameter.

The Mira 230 and Mira 230 Q wire strippers allow you to process a wide range of wire specifications. They are particularly suitable for processing multi-core wires due to their directly consecutive work steps for stripping and cutting without changing the program. Each wire and sequence can be stored in the library and reproduced at any time. The electronic automatic conductor detector ACD checks for possible contact between the blade and conductor and thus prevents undetected faulty wires. ACD technology is also used as an automatic adjustment aid in which the incision diameters are adapted to the conductor diameter.

The Mira 340 and 340 Q work precisely and with high stripping quality thanks to the rotating cutting unit with 4X blades. The patented ACD incision monitoring system ensures quality assurance during cutting and/or pulling by detecting the slightest contact between the blade and conductor. In addition, multi-core wires and multi-layer insulation can also be efficiently stripped with sequence processing in the Mira 340 and 340 Q. Operation is via the intuitive touch screen. The articles can be read error-free using the barcode and recorded in the article library. This ensures efficiency and repeatability.

The Mira 340 and 340 Q work precisely and with high stripping quality thanks to the rotating cutting unit with 4X blades. The patented electronic automatic conductor detector ACD ensures quality assurance during cutting and/or pulling off by detecting the slightest contact between the blade and conductor. In addition, multi-core wires and multi-layer insulation can also be efficiently stripped with sequence processing in the Mira 340 and 340 Q. The units are operated via the intuitive touch screen. The articles can be read error-free using the barcode and recorded in the article library. This ensures efficiency and repeatability.

Rotating flat blades on the Mira 440 ensure an extremely smooth cut, which is particularly precise thanks to the integrated centering. Stripping coaxial cables very demanding i. Up to 9 conductor layers can be processed with the MIra 440. Several thin layers such as insulation, metal mesh, foil and dielectric are removed in just one process. This existing sequence processing is essential, especially for multi-core cables, coaxial, triaxial cables and hybrid cables. High productivity and reproducibility is possible with fast article selection from the library and optional barcode scanning.

Flexible coaxial cables with hard insulation surfaces are particularly demanding as they can deform during a normal 2-blade cutting process, and this can potentially lead to one-sided damage to the insulation. The three cutting blades of the Mira 440 3B therefore distribute the cutting force evenly and offer more stability. Due to the three blades, the minimum conductor diameter is limited to 0.5 mm. The device can also process ordinary coaxial, triaxial and hybrid cables. However, tip and cleaning cuts are not possible.

The Mira 440 SF works with the industry-proven rotary cut, which is particularly suitable for coaxial cables. In addition, the machine has a centering jaw that aligns the wire exactly in the center. The smooth cutting blade points towards the dielectric. This ensures perfect cutting quality. The special feature of the 440 SF is its application for semiflex cables, which usually have dip-tinned braided shield. This behaves differently than other jackets on a wire. For this purpose, this version of the Mira Series has been equipped with an optimized cutting geometry that meets these high requirements.

The Komax Mira 670 wire stripping machine is the ideal solution for efficiently processing a wide range of wires and insulation materials. With the ability to process wires up to 26 mm in diameter and strip lengths up to 200 mm, it offers high productivity and excellent strip quality. The machine features a 6-blade rotary head that ensures precise processing and high pull-off force. It also offers intelligent design and features to maximize strip quality, such as a parts library and barcode scanning to get the right data in a flash.

The Cosmic 42R is particularly suitable for processing micro coaxial cables in small to medium quantities. The rotating stripping head works with three blades. The built-in centering jaws position the wire precisely. It is then optimally prepared for further handling with the twisting function. The electrical stripper also works with multi-layer cables with up to 9 steps; the sequence of the processing steps is freely programmable and independent step parameters can be adjusted for each step. Up to 1000 different wires with their respective processing parameters can be stored in the device to ensure fast production.

The ILC Bench Top offers a high-accuracy laser rotary cutting head, ensuring precise cuts for various wire gauges while maintaining quality. With its programmed capabilities, wire changes are fast and simple, without requiring a wire holder. The ILC Bench Top range includes two models: The ILC-20/8 BT comes equipped with a 20-watt laser source, it handles wire outer diameters ranging from 0.5 to 7.8 mm (0.02 to 0.31 in) and performs circular cuts. The ILC-20/8 BTS is also equipped with a 20-watt laser source, it handles the same wire outer diameter range. In addition to circular cuts, it offers straight slits and spiral slits as cutting options.

The ILC Bench Top range offers versatile wire processing capabilities with its high-accuracy laser rotary cutting head. It can handle multiple wire gauges without compromising the cut quality. The programmed capabilities ensure fast and simple changes from one wire to another, even when using different gauges and constructions. One model in the ILC Bench Top range is the ILC-30/20 BTS. It features a 30-watt laser source and is optimized for wires with an outer diameter of 8 to 20 mm (0.3 to 0.8 in), with a maximum outer diameter of 1 to 20 mm (0.04 to 0.8 in). The ILC-30/20 BTS can perform circular cuts, straight slits, and spiral slits. These features make the ILC Bench Top an efficient solution for a wide range of wire processing applications.

The technology of the Sylade 7 was developed for the Aerospace wiring industry and offers a higher level of accuracy, quality, and reduces production time compared to traditional tools. The bench top wire stripper has become a reference for the stripping of shielded and twisted cables and meets the new requirements of ASD EN2812, SAE AIR6894 aeronautical standards. The Sylade 7 is available as a stand-alone unit or can be integrated into an automatic production line for harness building. Additionally, it meets the requirements of aluminum cable stripping used in the transportation field. Sylade 7 still offers a quality strip to ensure no inner wire damage to these new families of technical cables.

The Sylade 7H is a compact, lightweight, and portable device revolutionizing the stripping process for twisted shielded and non-round wires for the Aerospace industries. Equipped with high-precision semi-conductor lasers, the Sylade 7H ensures precise and accurate cutting of the outer jacket with remarkable depth and width control. With its versatility, this innovative tool can effectively handle a wide variety of cables, providing a superior alternative to conventional stripping methods. The Sylade 7H line includes two models: the Sylade 7b H (blue - 445 nm) and the Sylade 7v H (violet - 405 nm), each optimized for outstanding performance in their respective wavelengths. Experience enhanced precision, convenience, and efficiency in wire stripping with the Sylade 7H wire laser stripper.